Veenhuis Ecoline 18.450

Komentarze

Veenhuis Ecoline 18.450 – Slurry Tanker

Standard Equipment:

Self-supporting construction; fully galvanized

Optional instead of galvanized: sandblasted, metallized, and painted in Veenhuis yellow (with transparent coating)

ADR axles 150×150 mm, brake drums 420×180 mm

Forced steering with cylinder on the left side, K50

Pneumatic brakes with ALB system

BKT tires 650/65 R30.5 TL FL-630 Super STB 176D

Tank equipped with wheel covers and PVC mudguards

Lower hitch with adjustable drawbar and K80 ball coupling

Hydraulic support leg (operated by hand pump)

Inspection opening Ø 600 mm

Hose holders on both left and right sides

Float with level indicator on the front wall

Vacuum pump mounted at the front of the drawbar

MEC II vacuum pump – 13,500 l/min D; max pressure 0.5 bar

PTO speed 1,000 rpm; air output approx. 11,000 l/min

Manual vacuum/pressure switch-over

Oil separator/silencer and dust filter

Overflow tank with drain valve and pressure gauge

4-point double-acting linkage with Walterscheid hooks, Cat. III (1010 mm)

Hydraulic distributor unit “hydro-control” with stepwise switching for operating grassland and arable injectors. Functions: lift/lower (double-acting with pressure regulation), rear valve and distributor (including automatic direction switch with time relay). Hydraulic hoses to tractor: 1× DA function with pressureless return

Hydraulically operated rear valve 6" (high-mounted) for feeding injectors with 5" KKV connection

Hydraulic functions for folding/unfolding the injector (rear hydraulic connections)

Manual side valve 6" (left) with quick coupling and vent valve

Suction hose 6", length 4 m

Single wide-angle PTO shaft WWE 2380, 3/8" yoke, 6-spline profile

Lighting with individual LED rear lights and front width indicator lights

3-pin 12V power socket at the rear of the tank

Tank Specifications:

Capacity: ± 18,450 liters

Tank diameter: Ø 2,200 mm

Tank length: 6,000 mm

Optional Equipment:

Hydraulically suspended drawbar

BKT tires 750/60 R30.5 TL FL-693 Ridemax 181 D

Hydraulic vacuum/pressure switch-over

Accelerator on left valve to speed up filling (70 l/min at 160 bar)

Manual side valve 6" (right) with quick coupling

Manual side valve 6" (rear left) with quick coupling

EasyControl operation system

5" hose, 3 m long, for injector feed

Manual dosing valve